Box sections

16 products

About Box sections

Square and rectangular hollow sections

This category features square and rectangular tubes for frames, canopies, fences, gates, trusses, greenhouses, and metal structures. They are purchased by builders, workshops, manufacturers, and private homeowners.

How to choose a hollow section

The dimensions are listed as width × height × wall thickness, for example, 40×40×3 mm. For fences and lightweight frames, 20×20–40×40 with a wall thickness of 1.5–2 mm is sufficient; for canopies and trusses, choose 60×40–100×100 with a thickness of 3 mm or more. The thicker the wall, the less it bends and the greater its weight: 40×40×3 mm weighs about 3.3 kg per meter.

The standard length is 6 or 12 m. The steel grade is usually Ст3 or S235. The length and weight calculator on the product page converts meters to tonnes and back, and the seller delivers the metal using their own vehicle.

For welded structures, combine the tube with an angle bar and steel sheet; round tubes are available in the water and gas pipes and electric-welded pipes category.

Frequently asked questions

Which tube should I choose for a canopy? It depends on the span, snow load, and truss spacing; calculate it according to the project.

Do hollow sections need to be painted? Yes, priming and painting are recommended to prevent corrosion.